Pallet Racks in Surfside Beach, SC

Glenns Bay Trade Center on Glenns Bay Road was built in 1994 and includes multiple 1,000 square foot unconditioned bays. This documented format places a clear emphasis on compact planning. Draw the actual interior dimensions and identify any space assigned to work activity before deciding how much can become permanent storage.

Shelving along a suitable wall can organize consumables and smaller cartons while leaving a central movement area. Avoid assuming that every wall should carry a continuous storage run. Some sections may be needed for order assembly, counting deliveries, or temporarily holding supplies that are being transferred into a service vehicle.

The documented bays have 10 by 12 foot overhead doors. Confirm the opening orientation and actual usable clearance at the selected unit before matching it to incoming loads. A load passing through the opening still needs a workable route to its assigned position once inside.

Light selective pallet rack should be considered only where pallet sizes, weights, and handling equipment fit the available space. Keep enough approach room to place and retrieve loads without moving the day's prepared work first. A short rack section can be appropriate even when most inventory belongs on shelving rather than additional pallet levels.

Group hand picked stock by how it is collected for work, while retaining separate labels for each item. Similar looking consumables need clear identification so staff do not rely on carton appearance alone. Keep active issue quantities near the preparation area and reserve cartons in assigned shelving positions.

Use containers appropriate to the size and weight of loose parts rather than allowing open cartons to spread across several shelves. Define a return location for unused job supplies so they can be checked before going back into active stock. That small step helps prevent partly filled containers from obscuring the available quantities in regular picking locations.

The documented bays are unconditioned, so heat and humidity should be part of the material and packaging discussion. Evaluate storage finish against actual exposure and review which supplies need additional environmental protection. Do not treat the presence of a roof as evidence that all stored products experience controlled conditions.

Glenns Bay Road links US 17 Business and US 17 Bypass, but those connections do not determine a shop's receiving volume. Size staging around actual deliveries and crew departures. Keep temporary stock within a defined area rather than letting it fill the access space beside shelving. Any pallet rack installed should be anchored to the floor and labeled for its intended loads.